RP1600X & eID10 Alpha Series

FEATURES

The RP1600X and eID10 Series redefine the biometric handheld experience with unparalleled flexibility in configuration and the convenience of clip-on eID10 modules for the RP1600X. Serving as the base terminal, the RP1600X seamlessly integrates with various eID10 modules equipped with various fingerprint sensors (FAP20/30/45/50), MRZ reader, ePassport chip reader, and HID iClass/Seos reader. Together, they support advanced multi-modal biometric authentication including dual iris capturing, fingerprint reading, and facial recognition, along with seamless reading of diverse ID documents such as passports, national IDs, driver's licenses, and TWIC cards. This platform not only enhances user convenience but also simplifies application development and device management processes.

Main Features of EID10 Alpha (FAP30) + RP1600x

Fingerprint Scanner (FAP30, FBI Certified)
Dual Iris Scanner
Contact Smart Card Reader
NFC
13MP Camera (Facial Recognition available)
HID iClass Reader

Main Features of EID10 Alpha (FAP45) + RP1600x

Fingerprint Scanner (FAP45, FBI Certified)
Dual Iris Scanner
Contact Smart Card Reader
NFC
13MP Camera (Facial Recognition available)
HID iClass Reader

Main Features of EID10 Alpha (FAP50) + RP1600x

Fingerprint Scanner (FAP50, FBI Certified)
Dual Iris Scanner
Contact Smart Card Reader
NFC
13MP Camera (Facial Recognition available)
HID iClass Reader

One Flexible Platform Serving Diverse Applications

Clip-on type convenient to switch functionalities according to tasks
Supporting from one finger verification to 4-4-2 enrollment
Accessories sharable (Battery, Desktop Cradle, etc.)
Streamlining application development/upgrade & update and device management

Multi-modal Biometrics and Various Credential reading in one device

Diverse Fingerprint Reader FAP 20 / 30 / 45 / 50

Dual IRIS Scanner

Facial Recognition

ISO 7816 Contact-type Smart Card Reader

NFC

HID iClass

ePassport / eID RFID reader

Professional Barcode reader
All in one or Mix & Match possible

Born to Survive in Extreme
Environment

EID10 Plus is ideal to be used in any rough environment. With IP64 sealing, it is
well protected from dust and water ingress. Its operating temperature varies
from 0℃ to 50℃ for Snap-on and from -20℃ to 60℃ for base terminal, and it
can endure 1.5m multi drops.

Reliable High Speed
Multimode Connectivity

Speedy and secure data communication with a remote data center like AFIS is
critical to ensure successful field operation. Thus, the EID10 PLUS / Alpha offers latest
and advanced technology of connectivity options :

Connectivity Specification

4G LTE	Gemalto PLS8-E : LTE , HSPA+, EDGE, GPRS LTE : 800, 900, 1800, 2600Mhz HSPA+ : 900, 1800, 2100Mhz GSM/GPRS/EDGE : 900, 1800Mhz
WLAN	IEEE 802.11 a/b/g/n/ac
Bluetooth	V4.2 BLE + HS (BT Headset support)
AGPS	A-GPS (Ublox-7 Series)

Two SAM Card Slots

SAM Card becomes gateway to read ID from IC Card Reader. It makes secure
transfer of information to connected database or main server.

Enriched Accessories

Single-dock Cradle with Ethernet

Quad-dock Cradle with Ethernet

Various Protection and Carrying cases

Hot-swappable Battery

Reliable Solution

TAA Compliant

FBI Certified

U.S. GSA registered

Performance Characteristics
CPU	1.8 GHz Hexa-core processor
OS	Android 11
Memory	RAM 4GB, ROM 32GB

Physical Characteristics
	RP1600X	FAP50 + RP1600X	FAP45 + RP1600X	FAP30 + RP1600X
Dimensions	147mm(H) X 78mm(W) X 21mm(D)	240mm(H) x 117mm(W) x 43mm(D)	228mm(H) x 82mm(W) x 33mm(D)	228mm(H) x 82mm(W) x 33mm(D)
Weight	300 gram with standard battery 340 gram with extended battery (4000mAH)	610 gram with extended battery (4000mAH)	478 gram with extended battery (4000mAH)	468 gram with extended battery (4000mAH)

Display	4.3 inch WVGA (Sunlight readable)/480 X 800 (Capacitive touch, Resistive touch optional)
Input	5 Front Key / 5 Side key
Battery	Standard battery / 2860mAh Li-ion : Contact Smart Card Reader (optional) Extended battery / 4000mAh Li-ion : Contact Smart Card Reader (optional) Built-in Backup Battery / 200mAh Li-Polymer Hot-Swap available
Communication Interface	Host : USB2.0 High Speed Client : USB 2.0 High Speed External Serial RS232C RJ45 Port (1Slot/4Slot Ethernet Cradle) * Only USB Client operates when installing EID 10 PLUS / Alpha
Notification	Vibration and Charging LED, noise when certain icon is tapped on screen
Audio	Speaker / Receiver / MIC
Expansion Slot	Micro SD card(up to 32GB)

User Environment
Operation Temp	-20 ℃ ~ +60 ℃ (-4˚F~140˚F)
Storage Temp	-30 ℃ ~ +70 ℃ (-22˚F ~158˚ F)
Humidity	Non-condensing, 93%
Sealing	IP64
Drop Spec	1.5M drop to concrete
Wireless Communication
Wireless(WWAN)	Gemalto PLS8-E : LTE, HSPA+, EDGE, GPRS LTE : 800, 900, 1800, 2600Mhz HSPA+ : 900, 1800, 2100Mhz GSM/GPRS/EDGE : 900, 1800Mhz
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Bluetooth	Bluetooth V4.2 BLE + HS (BT Headset support)
GPS	A-GPS (Ublox-7 Series)
Data Capture
Finger Print	FAP30 / 45 / 50 Integrated Biometrics
Iris Scanner	Dual Iris Scanner Sensor : 5MP B&W CMOS sensor Range : 270±10mm / Resolution : Above 300 pixel/cm Illumination : IR LED / Image : 2592 x 920 x 30 frame
Contact Smart Card	Contact Smart Card Reader
NFC	Near Field Communication Tag Reader ISO 14443 A/B, Mifare Desfire, ISO15693 Card support 2 SAM Slot
Barcode Scanner	1D Laser \| 2D Imager Zebra SE965 \| Zebra SE4750
Camera	13.0MP Auto Focus, Flash
Keyword	KYC terminal, Mobile passport reader, Biometric Terminal, Mobile Contact Smartcard reader, Mobile Fingerprint Terminal, ICA certified Terminal, Emirates ID Reader, Biometric Reading Mobile Terminal, Facial Recognition, IRIS Scanner
Accessories
Standard Accessories	All in the gift box (Desktop cradle, PSU, USB cable, Stylus, Screen protector)

Fingerprint Sensor

		EID10 Alpha			* EID10 PLUS
		FAP50	FAP45	FAP30	FAP20
Fingerprint Scanner	Sensor Type	LES (Light Emitting Sensor)	LES (Light Emitting Sensor)	LES (Light Emitting Sensor)	Optical
	Resolution	500ppi	500ppi	500ppi	500ppi
	Supplier	Integrated Biometrics	Integrated Biometrics	Integrated Biometrics	Suprema
	Model	Five-O	Sherlock	Danno	BM-Slim2
	Sensing Area	3.38" x 2.12"	1.6" x 1.5"	0.8” x 1.0”	0.6” x 0.8”
Fingerprint Capture	FBI Certification	FBI Appendix F-certified, Mobile ID IQS FAP 50, GSA FIPS201	Mobile ID IQS FAP 45, PIV, GSA FIPS 201, FBI Appendix F	PIV 071006, FIPS 201, FAP 30 / Certified to Mobile ID Requirements	FBI PIV and FBI Mobile ID FAP 20
	Capture	Flat / Rolled	2 fingers Flat / 1finger Rolled	2 fingers Flat	1 finger Flat
	Dual Fingerprint	Yes	Yes	N/A	N/A
	4 4 2	Yes	N/A	N/A	N/A
Fingerprint Image Output	Image Size	1600 x 1000 pixels	800 x 750 pixels	400 x 500 pixels	300 x 400 pixels
	256 gray scale	Yes	Yes	Yes	Yes
	Bitmap raw format	Yes	Yes	Yes	Yes
	WSQ Compression Ratio	FBI Compliant	FBI Compliant	FBI Compliant	FBI Compliant
	Template	RAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)	RAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)	RAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)	RAW, BMP, WSQ, ISO 19794-4 (FBI-approved)

Performance Characteristics
Model	Morpho CBM-E3	IB Sherlock FAP45
Sensor Type	Optical Sensor	LES (Light Emitting Sensor)
Sensing Area	22.0mm(W) x 14.0mm(L)	40.6m(W) x 38.1mm(L)
Sensing quality	500 dpi	500 dpi
Pixel Resolution	256 gray scale values	256 gray scale values
Capture	1 finger flat	2 fingers Flat / 1finger Rolled
Image Size	300 x 400 pixels	800 x 750 pixels
Bitmap raw format	Yes	Yes
Certifications	RAW, BMP, WSQ, ISO 19794-4 (FBI-approved)	FRAW, JPEG2000, BMP, PNG, WSQ (FBI-approved)
Contact Smart Card Reader
	Description	Remarks
IC Driver	CR30	Gemalto
Standard Compliance	EEM&non-EVM	EMVCo, emv2000 4.2 and PBOC
Supported Smartcards	Asynchronous	Microprocessor cards T=o, T=1 protocols Transmission rate: up to 826Kbps (TA 1=17=@CK=4.8MHz)
Supported Smartcards	Synchronous	Through the Command Interpreter
	Smart card power supply	5V and 3V and 1.8V Short circuit current limitation Power up/down control consequence
Smart Card Interface	Smart card management	Card insertion/Extraction detection
	ESD protection on card I/O	8KV contact
Serial Host Interface	Serial asynchronous link	UART, TTL Level(+3.3V) 9600bps~115,200bps Format: 8bits, no parity
	Communication Protocol	CCID V1.0 on serial TTL linkU
USB Host Interface	USB 2.0 compliant	CCIE V1.1 Full speed 12Mbps, hub-less Multi-slot driver for Windows
Ambient Operating Temperature	-10°C to +50°C
NFC Reader
Model	PN548, NXP Semiconductor
Operating Frequency	HF, 13.56MHz
RF protocols	ISO/IEC 14443A/B MIFARE DESFire ISO/IEC 15693
SAM Slot	2 SAM Slot
Features	ARM Cortex M0 microcontroller core with Code memory: 96KB ROM & 28KB EEPROM Data memory: 7KB SRAM, 4KB EEPROM Full NFC Forum compliance (wave 1&2) and EMVCo Digital compliance

accessories

Leather Protection case for
eID10 Alpha & RP1600x

Ethernet 4 slot cradle with PSU
(4 slot Cradle)
4DTC-RP1000-UE

Desktop cradle with USB Type A and B
(Single Slot Cradle)
SDTC-RP1000-UX

Desktop cradle with USB Type A and B,
and Ethernet (Single Slot Cradle)
SDTC-RP1000-UE

Power supply for single-slot desktop cradle
PS-RP1000-SDTC

Ethernet 4 slot cradle with PSU
(4 slot Cradle)
4DTC-RP1000-UE

Desktop cradle with USB Type A and B
(Single Slot Cradle)
SDTC-RP1000-UX

Desktop cradle with USB Type A and B,
and Ethernet (Single Slot Cradle)
SDTC-RP1000-UE

Power supply for single-slot desktop cradle
PS-RP1000-SDTC

APPLICATIONS

All-in-One EID & Passport Reader

Law Enforcement

Benefit Delivery

Border Control & Refugee Registration

Compulsory ID Registration

Membership Management and Customer Registration

Voting and Ballot Box

Performance Characteristics
CPU	1.8 GHz Octa-core processor
OS	Android 6.0 Marshmallow
Memory	RAM 3GB, ROM 16GB
Physical Characteristics
Dimensions	147mm(H) X 78mm(W) X 21mm(D)
Weight	420 gram with standard battery 470 gram with extended battery (4000mAH)
Display	4.3 inch WVGA (Sunlight readable)/480 X800 (Capacitive touch, Resistive touch optional)
Input	5 Front Key / 5 Side key
Battery	Standard battery / 2860mAh Li-ion Contact Smart Card Reader (optional) Extended battery / 4000mAh Li-ion Built-in Backup Battery / 200mAh Li-Polymer Hot-Swap available
Communication Interface	Host : USB2.0 High Speed Client : USB 2.0 High Speed External Serial RS232C RJ45 Port (1Slot/4Slot Ethernet Cradle) * Only USB Client operates when installing EID 10 PLUS / Alpha
Notification	Vibration and Charging LED, noise when certain icon is tapped on screen
Audio	Speaker / Receiver / MIC
Expansion Slot	Micro SD card(up to 32GB)
User Environment
Operation Temp	-20 ℃ ~ +60 ℃ (-4˚F~140˚F)
Storage Temp	-30 ℃ ~ +70 ℃ (-22˚F ~158˚ F)
Humidity	Non-condensing, 93%
Sealing	IP64
Drop Spec	1.5M drop to concrete
Wireless Communication
Wireless(WWAN)	Gemalto PLS8-E : LTE, HSPA+, EDGE, GPRS LTE : 800, 900, 1800, 2600Mhz HSPA+ : 900, 1800, 2100Mhz GSM/GPRS/EDGE : 900, 1800Mhz
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Bluetooth	Bluetooth V4.2 BLE + HS (BT Headset support)
GPS	A-GPS (Ublox-7 Series)
Data Capture
Finger Print	Fingerprint scanner (Morpho CBM E3)
MRZ	Machine Readable Zone Reader (Access-IS OCR310-E)
Contact Smart Card	Contact Smart Card Reader
NFC	Near Field Communication Tag Reader ISO 14443 A/B, Mifare Desfire, ISO15693 Card support 2 SAM Slot
MSR	Magnetic stripe Card Reader
Barcode Scanner	1D Laser \| 2D Imager Zebra SE965 \| Zebra SE4750
Camera	13.0MP Auto Focus, Flash
Accessories
Standard Accessories	All in the gift box (Desktop cradle, PSU, USB cable, Stylus, Screen protector)
OCR (MRZ Reader)
Model	OCR310e
Standard OCR Fonts	OCR-B and E13B
Machine Readable Passports(MRP)	2 lines of 44 characters
Machine Readable Visas(MRV)	2 lines of 44 characters, 2 line of 36 characters
Travel Documents	2 lines of 36 characters, 3 line of 30 characters
ID Document	1 line of 30 characters, 2 lines of 36 characters, 3 lines of 30 characters
MRZ stripe speed	up to 100cm/sec
OCR decoding	up to 0.3 second Field of view object height: 19.6 mm nominal
Field of View Object Height	19.6 mm nominal
Depth of Field	1.5 mm maximum from imager window
MSR (Magnetic Stripe Card Reader)
Model	MH1637A
Magnetic stripe Reader	Reads magnetic cards complying with ISO7811/2-5
Fingerprint Sensor
Model	Morpho CBM-E3
Sensor Type	Optical Sensor
Sensing Area	22.0mm(W) x 14.0mm(L)
Sensing quality	500 dpi
Pixel Resolution	256 gray scale values
Database capacity (users)	500 (Standard) up to 5000
Database capacity (templates or fingers)	1000 (Standard) up to 10000
Matching capability (1:N)	1:500 (Standard) up to 1:5000
Certifications	FBI PIV IQS / ISO 19794-4: 20011(Annex. B) MINEX & FIPS 201 compliant algorithms / STQC
Contact Smart Card Reader
	Description	Remarks
IC Driver	CR30	Gemalto
Standard Compliance	EEM&non-EVM	EMVCo, emv2000 4.2 and PBOC
Supported Smartcards	Asynchronous	Microprocessor cards T=o, T=1 protocols Transmission rate: up to 826Kbps (TA 1=17=@CK=4.8MHz)
Supported Smartcards	Synchronous	Through the Command Interpreter
	Smart card power supply	5V and 3V and 1.8V Short circuit current limitation Power up/down control consequence
Smart Card Interface	Smart card management	Card insertion/Extraction detection
	ESD protection on card I/O	8KV contact
Serial Host Interface	Serial asynchronous link	UART, TTL Level(+3.3V) 9600bps~115,200bps Format: 8bits, no parity
	Communication Protocol	CCID V1.0 on serial TTL linkU
USB Host Interface	USB 2.0 compliant	CCIE V1.1 Full speed 12Mbps, hub-less Multi-slot driver for Windows
Ambient Operating Temperature	-10°C to +50°C
NFC Reader
Model	PN548, NXP Semiconductor
Operating Frequency	HF, 13.56MHz
RF protocols	ISO/IEC 14443A/B MIFARE DESFire ISO/IEC 15693
SAM Slot	2 SAM Slot
Features	ARM Cortex M0 microcontroller core with Code memory: 96KB ROM & 28KB EEPROM Data memory: 7KB SRAM, 4KB EEPROM Full NFC Forum compliance (wave 1&2) and EMVCo Digital compliance

Download Marketing Documents

Download Image

All Products

PRODUCTS

All Product Page

INDUSTRIES

DOWNLOADS

SUPPORT

TECHNICAL SPECIFICATION